Showing posts with label cheap. Show all posts
Showing posts with label cheap. Show all posts

Saturday, April 6, 2013

Our First GIVEAWAY!

Hand-Dyed Market Tote by Tiny Tipis


Win a FREE market tote from Tiny Tipis! Giveaway open worldwide with FREE shipping included. Rose colored Hand Dyed, all natural, and handmade - this is a $45 value. See the Created By Laurie Blog for Easy Entry and more details. Giveaway ends April 19, 2013


Read more about Tiny Tipis
SHOP Tiny Tipis on Etsy
Like Tiny Tipis on Facebook
Follow Tiny Tipis on Pinterest
BUY Tiny Tipis on Zibbet

Monday, February 25, 2013

DIY Tie Dye with Red Wine

Easy Do It Yourself Dye

 I'm obsessed with Fabric, especially canvas. It's natural, it's strong, it has more uses than a swiss army knife... and it can be a challenge to Dye. There's nothing I love more than a challenge. 



I also love red wine. 




Here is how I use Red Wine to Dye Fabric, including so-called "non-dye-able" Canvas, and a shirt I never wore:




Supplies: 
White or light colored fabric (I used cotton)
2+ cups Red Wine
Rubber Bands or Hemp Twine
Oven
Clean Baking Pan
Jar or Bucket 
Iron
An Old Towel

Supplies laid out ready to start dying fabric





 Step 1: Tie up items to be dyed. If you bind it with more wrinkles you will end up with more light colored areas after you are done. The tighter you tie or band it up the more areas of light color will remain as well.

Cotton articles tied up and ready to be Dyed with Red Wine





  Step 2: Steep the items in the Red Wine for at least 2 hours. I let mine soak for 4 hours.

A white shirt after soaking in red wine for 4 hours





Step 3: Squeeze the wine out of the fabric. Leftover wine can be saved to re-use next time you want to dye but the color won't be quite as strong. For really dark dye wring until no liquid drips. For lighter dye wring as much out as possible.

Wine Dyed items being laid flat to dry in the oven





 Step 4: Lay items as flat as possible on your clean baking sheet. Try not to let them touch or overlap so the color doesn't bleed from one article to another. Your baking sheet must be clean or you risk discoloring your dyed items. I covered mine with foil just to be safe.

Wine Dyed clothing and fabric drying in an oven





 Step 5: Set oven at 170 to 180 Fahrenheit with damp dyed items inside. The combination of heat and drying with the wine pigment still on the fabric helps set the color. Make sure to set a timer so you don't start a fire. I checked on my items every 10 minutes. The small items took about 20 minutes to dry fully while the shirt took over an hour. I didn't want to put freshly dyed items in the dryer in case it might leave color behind which is why I chose to do it in the oven.

Check your items every 10 minutes: Safety First!





Step 6: (This step is optional. I did it to make sure the color was fully set.) Lay your old towel on an ironing board. Iron dyed items as you normally would. The heat will help set the color so it won't fade with washing. The towel prevents your ironing board cover from getting any color on it if your dyed articles aren't fully dry yet.

Small test items in a Red Wine Dye Project





Step 7: Hand wash dyed clothing and fabric in warm water to get rid of any pigment that didn't set. This way the color won't spread to items you don't intend to dye when you wash it after regular use. After dying an article you should avoid washing it in hot water to keep the colors bright.

Gorgeous color and pattern from Red Wine Tie Dye





 And the finished product... 
I like this shirt so much better with the natural earthy rouge dye than I did when it was plain white. I think I'll actually wear it now!




Thanks for reading!!!
Click here for more great DIY ideas or visit the other Tiny Tipis Blog to learn about recycled urban gardening.





 Tiny Tipis is a small handmade company providing environmentally friendly products to help customers reduce their carbon footprint. We focus on using high quality materials with attention to detail and running our company as close to zero waste as we possibly can. All shipping materials are recyclable, compostable, and/or biodegradable. See more of what Tiny Tipis does for our planet at any of the links below: 
 

 Thank you for being environmentally responsible!!!

Thursday, February 7, 2013

DIY Valentines Day Gift

The Heart-ful Hand Warmer

A Picture Tutorial by Tiny Tipis

   
Visit the Tiny Tipis Store Here
I saw an idea on Pinterest this morning and had to try it. Since I was at a loss for what to give my husband for Valentine's Day I decided to make him something to keep him warm. I like to keep those that I love well-fed and warm. This simple present was free (recycled materials) and took about an hour total even with me pausing for pictures. Give it a try and let me know what you think.

 Supplies: Two scraps of T-shirt, Two rectangles of Fabric for exterior, One scrap of fabric for Heart Shape, Half a cup of 20 minute White Rice, Scissors, Thread, Sewing Machine, and Extra Thread to Hand-Embroider the Message.


Step 1: Sew one t-shirt scrap to the back of each piece of outer fabric. The T-shirt acts as a liner and stabilizer.


Step 2: Place Heart where you want it on the outer fabric and sew around the edge with a zig-zag stitch. You can use any shape you want. I used a heart so I could give it to my hubby for Valentines Day.

  

Step 3:  Embroider your Message with the visible side on the outer fabric. You could use a machine for this. I did it by hand to give it extra personality. I think this was my first time hand-embroidering.


 Step 4: Zig-Zag stitch around the edges with outer fabric facing in. Leave a 1 or 2 inch gap to turn and fill the handwarmer with the rice.

  

Step 5: Turn so that the correct side is now facing out and topstitch around the edges. Still leave the gap open so that you can fill the pouch with rice.

 

Step 6: Fill the Hand warmer with  20 Minute (NOT instant) White Rice. I used 1/2 cup but you can adjust the amount to fit your needs. More rice means longer heat. Less rice means a lower profile to fit better in a pocket. Top stitch the gap you left to close it.


 Step 7: The final step is to toss it in your microwave for 30 seconds. Pull it out and feel the heat. For a warmer effect microwave it longer. For less heat microwave it for a shorter time. The one I made stays warm for almost 30 minutes!





My hand warmer says, "You are loved" in shorthand or nerd lingo. What message would you embroider on your pocket size hand warmer?


 

For more great DIY ideas follow Tiny Tipis on Facebook, Pinterest, and Blogger. Also cruise over to the shop to see what's for sale today! Thanks for reading!!!

Wednesday, December 19, 2012

DIY Lace Patch for Clothes and Jeans

5 Simple Steps to Patch old Jeans with Lace


      Recently one of my favorite pairs of pants started ripping at the back. For a while I sucked it up and wore them with shorts underneath but the hole just kept getting worse every time I wore them so I decided to do something about it. In my massive piles of sewing odds and ends I happened to have lace... lots of lace (Thanks Grandma.) Follow along to see how I fixed my favorite pants to make them even better!






1) Lay clean pants on a flat surface with lace on top of the hole. My hole was big enough I needed two rows of lace to cover it. Cut the lace about an inch too long (1/2" extra for each side of the rip). If you don't cut the lace long enough your patch won't cover the entire hole and it will continue to rip further. 







2) Since my lace needed to be wider to cover the hole I just cut two pieces the same length and cut a piece of hemp cord (about 2" longer than lace segments) to use as a stabilizer for joining the lace. I then placed both lace segments back to back with the hemp in the middle. To join them I used the widest zig-zag stitch on my machine with a short stitch length for the maximum amount of strength in the seam. I stitched down the middle ensuring the hemp cord was captured inside the zig-zag and both pieces of lace were secured together. I decided to use hemp because I have it on hand, it is cheap, and I like the natural look of it with the lace. You could use any type of strong cord pretty much.







3) After joining my two lace segments I cut the hemp cord to be 1/4" longer than the lace on each side. I left the hemp longer so I would be able to turn it under and prevent unraveling. 







Broken needles happen... just make sure you pull out all the little metal pieces or it can really damage your machine. My needle broke while I was sewing around the extra thick seams in the crotch. If you advance the needle by hand in the thickest parts it's less likely to break.







4) (Showing stitches inside jeans) I first zig-zag stitched a big rectangle to secure the lace to the jeans. Make sure to turn your cording under and zig-zag over it extra well if you had to use it to stabilizer. If you don't the stabilizer cord will pull out and your patch will fail. I tried to only zig-zag on the busy parts of the lace to hide as much of my thread as possible on the visible side. The rectangle will keep the lace in place but you still need to sew down any ends that are loose so they don't stick out when you wear your pants. I did this by using a straight stitch to sew around the outer edges of the lace patch. You can see this in the photo above where the straight stitch makes little triangles outside of the zig-zagged rectangle. This way I don't have any loose lace bits flapping around on my butt.







 5) Last Step! Cut any loose thread ends and try pants on. Now brag because your favorite pants just got even better!




This took me about 30 minutes to do (even with taking photos) and maybe half a brain cell. When I wash these pants I try to turn them inside out to protect the lace from snagging on other clothes. So far the patch has held excellent with no damage. Let me know how your lace patches turn out!





 Tiny Tipis is a small handmade company providing environmentally friendly products to help customers reduce their carbon footprint. We focus on using high quality materials with attention to detail and running our company as close to zero waste as we possibly can. All shipping materials are recyclable, compostable, and/or biodegradable. See more of what Tiny Tipis does for our planet at any of the links below: 
 
 

 Thank you for being environmentally responsible!!!

Saturday, August 11, 2012

Secret Summer Recipe

There is a small thing I have been doing this month that not only helps keep my body healthy but reminds me to take little breaks. I have a secret recipe for a summer beverage that I think I may be willing to share finally and I promise you'll love it. I call it Health Tea. My hubby calls it "That Tasty Water Stuff." My son even drinks it and he can be kinda picky!

I make it in bulk and freeze portions not only to save money but to save me time. I will first cover how I make it in bulk and I will give the portions toward the end to make it in single batches in case you only want a little to try first. This beverage is beneficial for your body in how it helps you shed toxins, keeps you hydrated, gives you vitamins, and tastes amazing! Oh and did I mention it's cheaper than soda? Healthier too!  ;)


Items you will need:
2 Lemons
4 Limes
1 Large Cucumber
1 small chunk of Ginger Root
Apple Juice
A pitcher (1-2 liter)
7-8 Ziploc Freezer bags


Wash all ingredients well. You will be leaving the skin on everything so make sure it's clean.


Slice Cucumber into 1/8" slices with skin on.


 Slice the limes into 8 sections going from tip to tip. Slicing them in this direction keeps the pulp in the drink to a minimum.


You will cut the lime in half, then cut the halves in half, and then cut the quarters in half to make 8 slices from each lime.


 Slice the 2 lemons the same way you sliced the limes.


 I use very little ginger root because it is so potent. You will need less than 1 cubic inch and will slice it as thin as possible while still making it thick enough to stay in tact in water. The end result is slightly smaller than a quarter and about as thick.


Pull out 7 to 8 freezer safe bags. I use the 1 quart size. You will need 8 if you plan to freeze it all or 7 if you are making 1 batch to drink when done.


Into each bag you will put 2 lemon slices, 4 lime slices, 1 ginger slice, and 4-5 cucumber slices.



 Fill each bag 1/2 way with water. Get as much air out as you can before you seal it. Label the bags so you know when they were made and then put them in the freezer.




I stack mine in the freezer to save room.



 When you are ready to drink a glass pull a bag out of the freezer and put it in your pitcher. Pour fresh water over it until the pitcher is full. Once the ice melts you simple mix it 50/50 with apple juice and drink. I prefer to mix mine in the glass (I just eyeball the halfway point) because if you mix the apple juice in with the water it won't last as long in you fridge. If the water has too strong of a flavor for you add more water to dilute. I normally end up with 1.5 liters of water from 1 frozen bag.

I try to remove the floaters (the lemon, lime, ginger, and cucumber) from the water with a slotted spoon anywhere from 1 hour to 12 hours after the ice fully melts. If you leave the fruit in the water longer the taste becomes bitter. This will keep about a week in your fridge before you will need to make fresh.



 The portions for a single batch are 1/2 a lime (4 slices), 1/4 of a lemon (2 slices), a small slice of ginger root, and 4-5 cucumber slices. When not freezing let ingredients sit in the water 12-24 hours before removing with a slotted spoon. Mix 50/50 with Apple Juice when ready to drink.





 Slicing the ingredients every time you run out makes it seem like a lot of work. This is why I started making it in bulk. A nice variation if you want something a touch more refreshing even is to add a few mint leaves to the bags before freezing. It makes this refreshing beverage even more thirst quenching!




Thanks for reading! Let me know what you think of this and if you came up with any variations of your own.





Follow me on Pinterest for more amazing ideas or like me on Facebook to keep up with all the most recent updates. 

Saturday, July 14, 2012

Confessions of a Crazy Crafter

     Sometimes I think Springs and Summer are my favorite months. I feel incredibly productive with so many hours of light! One of the things on my plate this summer is leading a charity event for an animal shelter. I chose the Teller County Regional Animal Shelter to help on behalf of Artist's Helping Hands for many reasons.
     - They are a no kill shelter meaning they do not put animals down if they don't find owners.
     - They aided many people that evacuated during the Waldo Canyon Fire in Colorado.
     - When our dog found his way to their shelter they called to let us know and took such good care of him while he waited for us.
help furry creatures
Cassius the Great and my wonderful little man pose for me.
I'm excited to collect donations during the month of July 2012 for them and have already seen a great show of support from the charity group. I hope to hand out treats to some of the animals when I deliver the donations. If I am able to I will make sure to take pictures and post them.

     One of my personal projects this month is a cloth book of shapes for my son. Using an old pair of jeans and some colorful fabric scraps I've managed to cut out squares, diamonds, circles, rectangles, ovals, stars, and triangles. I am then sewing these onto large pieces of fabric which will become the pages. I can't wait to see the look on his face when I give it to him. Books are his favorite "toy."

     As I face moving in some 45 days I find myself hoping this next home will be a place I can stay for a while. With 3 bedrooms, a greenhouse, and an area inside large enough for me to start making full sized tipis it sounds like heaven to me. The yard is a decent size as well (though it needs a lot of work) and I hope to get permission from the landlord to keep chickens. It's a big move. The house needs a lot of work... cleaning, repairs, TLC, and such. The price is right though and despite all my nervousness I'm really excited to start on such a large project.

grocery bag shopping tote quality canvas sack     As far as Tiny Tipis goes I must say it is well. I recently filed my LLC forms making it an official company. It's the first step in taking things to the next level. I've also been evaluating ways to expand and offer more choices. One way I plan to do this is by offering hand painted bags. These are fairly easy to do, don't take up extra space in my currently small home, and the end result is making my customers very happy. For each new design I keep a stencil that can be traced on the canvas and then paint each one by hand with acrylic paint. I could cut corners and iron on printed designs but I don't want to loose the personal touch the hand painting adds not to mention the higher quality end result. I plan to start a line of more modern ones as well that will feature graffiti style art.



     For my own closet I decided to go through it and start recycling and upcycling my old clothes. A work in process is this thin shirt. It had holes at the hip seams that needed fixing and I decided to start giving it a new life. As soon as I finish it I will post a step by step blog on exactly what I did to it. Of course I had to add some lace to it.  ;)

recycled top feminine
I love lace  <3 <3 <3

If you would like to follow my garden blog you can do so here!

Thursday, July 5, 2012

Step-by-Step Vintage Hunting Vest Upcycle

     I was browsing the items at a yard sale one day when I found this treasure of a hunting vest. The piece had character and had seen many days of love and use but lacked any kind of style that would make me wear it in public. So I decided to redo it! With a little lace and an hour of my time I transformed this beast into a beauty. Here's how:









     1) I removed the fabric on the back that just kind of hung there using my seam ripper. This took maybe 10 minutes.












2) I got a bit impatient and added lace around the collar next. To do this I buttoned the vest and marked where the left and right sides came together above the buttons. I don't use pins when I sew so I just folded the lace under and started using a zig-zag stitch to attach it where my first mark was. I didn't cut the lace to length until I was perhaps 2" away from having it fully sewn on the front. Then, I tacked the lace down every so often to keep it from rolling up around the neck while being worn.











3) I used my seam ripper to finish separating the fabric below the arm. I wanted to give the vest a more feminine shape so to accomplish this I measured 1" in on each side at the base of the back. I connected this to the top where the armhole comes together. That's the brown line you see in the photo. I cut the excess off and sewed the seam back together. If you aren't confident in your altering skills you can always pin and try it on before you trim.













4) The last step was to add lace along the back where I took the old fabric panel off. To do this I once again folded my lace under at the edges and used a zig-zag stitch to attach it to the vest. Again, to avoid wasting lace, I always sew first and cut the lace to length when I'm a few inches away from having it completely sewn on. This eliminates concerns about elasticity differences between the vest and the lace.









     I left the back of the vest shorter than the front as a style choice. I like the way it causes the fabric to add even more of an hourglass shape around the waste. This can make boobs look bigger, mid sections look slimmer/longer, and hips look more feminine. Below is the end result... it's hard to get good pictures of yourself! This vest can be purchased on my etsy store if you like it as much as I do.



Thursday, June 21, 2012

Fabric Bowl Project Obsession

http://whipup.net/2008/09/20/how-to-fabric-bowl/
I've been a bit obsessed with fabric bowls this week. What a useful concept! They are washable, portable, and nearly unbreakable (perhaps the most useful feature for a stay at home mom.) I saw a picture on pinterest of a tutorial on how to crochet a sturdy bowl using multiple threads. When I clicked the link of course they wanted $4.99 for the "pattern" so as a seamstress/artist/creative type I stared at the picture for a moment and then set about making myself a bowl. I've since moved on to making nesting bowls for my husband and I's fifth wheel as these proved so nice.

First I would like to cover the various types of Cloth Bowls I saw. There are wrapped and sewn bowls, pattern sewn bowls (I call them petal bowls because of how the pattern looks before sewn), woven bowls, glue hardened bowls, and crocheted bowls. Of these types of handmade bowls the ones hardened with glue or fabric stiffener are the least portable. A soft bowl can be folded so that it fits in a small flat area and takes up less space - something I appreciate very much for storage space in the camper.

I decided to try the crocheted bowl since I had the materials readily available. Since there are two threads involved it makes the bowls a little stronger and more able to retain shape. The outer thread that is seen is plain yarn while the inner thread is an old t-shirt I cut into strips. The t-shirt yarn is thicker than the regular yarn so it gives the bowls the stability the standard yarn lacks. As you can see in the photo I used a single crochet and simply worked my stitch around the t-shirt yarn. When I've completed 10-15 stitches I gently tug the t-shirt yarn and it tightens everything. I repeat this the whole way through giving the bowl a more finished look. Don't tug too hard on the t-shirt yarn though or it will cause the prior stitches to buckle. 

I don't really have a formula or pattern I follow. I increase stitches and do my best to keep the first few rows flat and even because these become the base of the bowl. When I have the base 10% larger than looks needed I stop increasing so the sides will start to come in. I like to pull the sides of the  bowl in at the top as an extra stability feature. I do this by decreasing stitches on the top 2 rows only. I do the top 2 rows with a contrasting standard yarn and no t-shirt yarn filler. 

You can cut the t-shirt yarn and simply leave it loose in the stitches over it or you can pull it out and use it as a decorative stabilizer. I pulled my white t-shirt yarn out when the main bowl color ended and stitched it in swirls around the exterior of the bowl. This seemed to pull the various rows together even more and added a look I liked. 

The first bowl I made. It contains my husbands lighters on the counter.
There are no limits to these bowls except your ability and creativity. Crochet stitches come out so try something new. If you don't like it just pull it out!

To see other things I've made that are for sale or to request custom items and art visit my Etsy Page.